All Products Not Joe Yee

The Bamboocha is a hidden gem in Erik Rusnak's Aloha Lures Marlin series of baits. These have been produced in limited numbers and are therefore a ...

The Bamboocha is a hidden gem in Erik Rusnak's Aloha Lures Marlin series of baits. These have been produced in limited numbers and are therefore a ...

The Bamboocha is a hidden gem in Erik Rusnak's Aloha Lures Marlin series of baits. These have been produced in limited numbers and are therefore a ...

The 7" Flyer is a short nosed bullet shape with extremely heavy forward taper and 9" skirt saddle sizes (similar to a blunt nose bullet) - A very r...

The 7" Flyer is a short nosed bullet shape with extremely heavy forward taper and 9" skirt saddle sizes (similar to a blunt nose bullet) - A very r...

The 9" Flyer is a short nosed bullet shape with extremely heavy forward taper and 9" skirt saddle sizes (similar to a blunt nose bullet) - A very r...

The Horner Man by A La Vive Lures, made by Captain Gerard "Frothy" de Silva, is a large, slightly blunt nose style bullet with 12" sized skirt sadd...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 12" Hard Head is a large flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays down...

The Koya Lures 14" Hard Head is a massive flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays do...

The Koya Lures 14" Hard Head is a massive flat nose pusher with a tube shaped head but has a slight taper towards the nose. Dives deep and stays do...

**Lure comes skirted as photographed.  The XL Pothound by A La Vive Lures, made by Captain Gerard "Frothy" de Silva, is a large short nosed plunger...

From Hawaiian Malolo Bird Teasers on their design: "Our hand-crafted Hawaiian Malolo’s are teasers you can count on. Made and rigged with: Robust ...

From Hawaiian Malolo Bird Teasers on their design: "Our hand-crafted Hawaiian Malolo’s are teasers you can count on. Made and rigged with: Robust ...

Handmade by Brian Crampton The Crampton Baits Apahu is a double tapered, 12" sized plunger with an angled nose. Excellent all position lure, especi...

Handmade by Brian Crampton The Crampton Baits XL Plunger is a 14" sized plunger shaped lure with an angled nose. Has a flat back about 2/3 of the w...

Handmade by Brian Crampton The Crampton Baits XL Plunger is a 14" sized plunger shaped lure with an angled nose. Has a flat back about 2/3 of the w...

**Lure comes skirted as photographed. The Ganku Lures Long Bullet is more of a traditional style of bullet with a single tapered nose that starts a...

**Lure comes skirted as photographed. The Ganku Lures Long Bullet is more of a traditional style of bullet with a single tapered nose that starts a...

**Lure comes skirted as photographed. The Ganku Lures Long Bullet is more of a traditional style of bullet with a single tapered nose that starts a...

**Lure comes skirted as photographed. The Ganku Lures Long Bullet is more of a traditional style of bullet with a single tapered nose that starts a...

The Ganku Lures Longneck Pusher is a double tapered 7" sized flat nose bait that widens on each side towards the middle and then tapers back down t...

**Lure comes skirted as photographed. The Ganku Lures Short Cut Face is a 7" sized cut face with a similar single tapered slanted nose shape to the...

**Lure comes skirted as photographed. The Ganku Lures Short Cut Face is a 7" sized cut face with a similar single tapered slanted nose shape to the...

This Ganku Lures Bullet is not quite as wide or have as heavy of taper as the Bumbucha shape but is shorter than the Long Bullet and is a 9"+ (skir...

This Ganku Lures Bullet is not quite as wide or have as heavy of taper as the Bumbucha shape but is shorter than the Long Bullet and is a 9"+ (skir...

The Ganku Lures Bullet is known as the Bumbucha and is a 9"+ (skirt saddle size) trolling lure. The Bumbucha has more of a direct angle that cuts a...

The Ganku Lures Bullet is known as the Bumbucha and is a 9"+ (skirt saddle size) trolling lure. The Bumbucha has more of a direct angle that cuts a...

The Ganku Lures Bullet is known as the Bumbucha and is a 9"+ (skirt saddle size) trolling lure. The Bumbucha has more of a direct angle that cuts a...

The Ganku Lures Bullet is known as the Bumbucha and is a 9"+ (skirt saddle size) trolling lure. The Bumbucha has more of a direct angle that cuts a...

The Ganku Lures 9" Can Pusher is a heavy 9" (skirt saddle sized) flat nose trolling lure. Very popular head shape. Will catch anything from Mahi to...

The Ganku Lures 9" Can Pusher is a heavy 9" (skirt saddle sized) flat nose trolling lure. Very popular head shape. Will catch anything from Mahi to...

The Ganku Lures 9" Can Pusher is a heavy 9" (skirt saddle sized) flat nose trolling lure. Very popular head shape. Will catch anything from Mahi to...

The Ganku Lures 9" Can Pusher is a heavy 9" (skirt saddle sized) flat nose trolling lure. Very popular head shape. Will catch anything from Mahi to...

Handmade by Brian Crampton The Mini HoG was in fact made quite some time ago by Scott Crampton but due to molding issues was rarely produced. Now r...

Handmade by Brian Crampton The Crampton Baits HoG is a large 14" straight runner shaped head with a slight and steady taper towards the angled nose...

Handmade by Brian Crampton The Crampton Baits HoG is a large 14" straight runner shaped head with a slight and steady taper towards the angled nose...

Handmade by Brian Crampton The Crampton Baits XL Bullet was first made quite some time ago by Scott Crampton but due to molding issues was rarely p...

Handmade by Brian Crampton The Crampton Baits Plunger is a 12" sized plunger shaped lure with an angled nose. Has a flat back about 2/3 of the way ...

Handmade by Brian Crampton The Crampton Baits Plunger is a 12" sized plunger shaped lure with an angled nose. Has a flat back about 2/3 of the way ...

Handmade by Brian Crampton The Crampton Baits Plunger is a 12" sized plunger shaped lure with an angled nose. Has a flat back about 2/3 of the way ...

The Crampton Baits Flat Face Tube is similar to a Hard Head style lure shape. It is basically a chopped off version of his Tube lure but with bevel...

Handmade by Brian Crampton The Crampton Baits Small DT was first made quite some time ago by Scott Crampton but due to molding issues was rarely pr...

Handmade by Brian Crampton The Crampton Baits Tube is a 12" sized tube shaped lure with a beveled edge. The beveled edge allows it to perform bette...